5-20 Replace Ink Filters
13. Reset the ink float sensors by switching off power to the
printer, allowing the printer to shut down, then switching on
the power.
14. On the Front Page screen, press the (Menu) key to enter
the menu system.
15. Press the ) key repeatedly to highlight Maintenance.
16. Press the (Menu In) key display the Maintenance menu.
17. Press the ) key repeatedly to highlight Reset Reservoir
Filters.
18. Press the (Menu In) key.
You can reset an individual reservoir’s filter, or all filters.
The ink volumes for each filter are shown on the printer Sta-
tus pages (Front Page > Status).
19. Inspect the bottom of the ink reservoir for thickened ink. If
present, dispose of the ink or replace the reservoir.
The pigments will settle out of the ink over time and accu-
mulate on the bottom of the reservoir. If allowed to con-
tinue to accumulate, this ink could eventually cause ink
flow problems or counting errors.
