1-34 Parts Overview
10 Postheater — helps to dry the output prior to the
takeup. Incorporates turnbuckles that can be adjusted
to straighten the media path.
11 Pinch rollers (23 places) — grip the media during
loading and printing. If installed, a pinch roller adjust-
ment lever (11a) allows you to adjust the force or
release the pinch rollers to feed rigid cut-sheet media.
A media out sensor (11b) detects whether media ig1
s loaded.
12 Capping station — protects the printheads from drying
out while idle (not printing) for extended periods.
13 Ha n d l e — for pulling the printer on its casters and lift-
ing the end of the printer.
14 St and — supports the printer.
15 Casters (four places) — enables easy relocation of the
printer, can be locked in place.
16 Leveling pads (four places) — allows the printer to be
stabilized and leveled for consistent media feeding.
17 Docking station — holds the profilers, one for each res-
ervoir, that track ink and cleaning solvent usage, and
identify ink characteristics for the RIP.
18 Off-Head System (OHS) — reservoirs, electronics, vac-
uum (to maintain negative head pressure), and pres-
sure (for purging the printheads) that provide ink and
cleaning solvent for cleaning the printheads.
19 Ink filters — user replaceable, one for each reservoir, fil-
ters out impurities from the ink or cleaning solvent
prior to being sent to the printheads.
20 Ink reservoirs — holds the ink and cleaning solvent
supply, 3.5 liter capacity.
21 Power inlet — connects the printer to electrical power.
22 Standby power switch — places printer in standby
mode (to disconnect from power, disconnect power
cord).
23 VideoNet port — connects printer to print server.
24 Vacuum/Pressure (VP) assembly — provides vacuum
and pressure to the OHS and printheads.
25 Media supply and takeup system — drives and pro-
vides tension to the media supply and takeup spools.
26 Media advance switch — enables user to advance
media forward or backward during loading.
Index Description
