Workflow Overview 1-31
4. The server sends the image to the printer for printing.
Printing can be paused and resumed at the control panel,
enabling you to purge the printheads to recover jets or make
other adjustments. During the pause, the carriage goes to the
service station and idle spits.
Daily Shutdown 1. Cap the printheads (for instructions, see “Capping the Print-
heads” on page 3-11).
2. DO NOT POWER DOWN THE PRINTER.
If the printheads will be capped longer than overnight, follow
the instructions under “Daily Startup” twice a week to prevent
excessive ink clogging, then recap the printheads. If this is not
possible or impractical, or if the printer must be shipped, see
“Extended Power Down and Restart” on page 5-21 for instruc-
tions.
For further idle maintenance tips, see “Idle Jet Maintenance” on
page 3-3.
