A SERVICE OF

logo

21
Spring Plate Assembly
The ZX-10R engine is used with the leaf sprig built in type steel plate assembly (spring
plate assembly) in the clutch. The spring plate assembly are available for increase the
spring constant. When outbreak the starting judder, use the spring plate assembly of the kit
parts. Whenever the plate thickness is difference for adjusting the clutch plate, take care
the length [A].
Part Number Spring Constant ID Color
13089-0003 Standard None
13089-0011 40 % up comparison standard White
13089-0012 60 % up comparison standard Blue
Identification Color: The ID marks are on the springs between the steel plates.
Transmission
Type B ~ D of the kit gears are available of the 2005 model ZX-10R. To change the gear
ratios with combination the gears.
Remove the three steel balls (600A0500) from the output shaft assembly. This is done to
start easily the engine with the second gear.
Replace the circlips with new ones if they were removed.