A SERVICE OF

logo

25
Stator Installation
The stator is fixed to the cover 12 (14091-0444) by the bolts.
Run the alternator lead from the inside of the cover as shown in the illustration, and fix the
grommet by the plate (13271-0149: original part) and bolt (130Y0508: original part).
Be careful not to give too much torsion to the lead wire.
Kit Alternator Installation
Regulator
Use the kit alternator and the kit regulator (21066-0010) as a set. Install the kit regulator
same position of the original regulator. Connect the kit sub harness (26031-0323) between
the kit regulator and the kit alternator.