26
1. In case of without Starter Motor
※ Refer to the illustration of 1. Kit Alternator Installation.
Remove the [2] ~ [6], [8] parts and insert the plugs to the hole of the starter motor
inserted as shown in the illustration.
Part Name Part No. Remark
1 Plug 92066-1332 Kit
2 Plug 92066-1333 Kit
3 O-ring 92055-1262 Kit
4 Bolt 130G0625 Kit
5 Nut 312B0600 Kit
Caulking the bolt for unplug the plug.
Insert the plug into the hole of the starter moto
and tighten the nut.
Apply liquid gasket.
2. Original Alternator removal
Remove the original alternator related parts for use the kit alternator.
Close the holes of the alternator cover and crankcase as shown in the illustration.
※Used parts as following table.
Sealed Parts for Alternator
Part Name Part No. Remark
1 Grommet 92071-0022 Kit
2 Plate 13271-0149 Original
3 Bolt 130Y0508 Original
Sealed Parts for Crankcase
Part Name Part No. Remark
4 Plug 92066-0052 Kit
5 O-ring 670B2020 Kitl
6 Alternator shaft lever 13168-0035 Original
7 Bolt 92151-1930 Original
8 Bolt 92153-0758 Original
