5: Commands and Levels
PremierWave XN Command Reference 131
Note that quotes must enclose the value if it contains
show connection statistics
Selects the RSA/DSA certificates by name for the SSL
client.
Restores the default protocol as "TCP".
default tcp keep alive Restores the default 45 second connect mode TCP keep
Exits to the next higher level.
no address Removes the remote host address used to establish
Removes the connect tunnel AES decrypt key.
Removes the connect tunnel AES encrypt key.
Clears the RSA/DSA certificate selection.
Removes the remote port used to establish tunnel con-
nections.
Removes the SSH user name.
Disables the connect mode TCP keep alive timeout.
Sets the remote port to use for connect mode tunneling.
<number> = number of the port to use.
Uses SSH protocol for connect mode tunneling.
Uses SSL protocol for connect mode tunneling.
Uses TCP protocol for connect mode tunneling.
protocol tcp aes
Uses TCP protocol with AES encryption for connect mode
tunneling.
Uses Telnet protocol (with IAC) for connect mode tunne-
ling.
Uses UDP protocol for connect mode tunneling.
Uses UDP protocol with AES encryption for connect mode
tunneling.
Shows the current configuration.
Displays the last 20 commands entered during the current
CLI session.
show connection statistics
ssh username <text>
Sets the SSH user name for use when establishing tunne-
ling connections
with other devices.
tcp keep alive <milliseconds>
Enables TCP keep alive for connect mode tunneling and
sets the timer.
<milliseconds> = timer value, in milliseconds.
validate certificate disable
Skips verification of the server certificate when connect-
ing.
validate certificate enable Requires verification of the server certificate when con-
Makes connections using the specified Address.
Makes connections using the VIP name.
Stores the current configuration in permanent memory.
host 6 (config-host:6) level commands
