5: Commands and Levels
PremierWave XN Command Reference 54
Enters the diagnostics level.
Exits to the enable level.
Change to config host level
Changes to the command level for ICMP configuration
and status.
Changes to the interface configuration level.
Changes to the command level for IP configuration and
status.
Kills SSH session with index from "show sessions"
Kills Telnet session with index from "show sessions"
Enters the query port level.
Change to menu level for RSS configuration and status
Displays system information.
Displays the last 20 commands entered during the current
CLI session.
smtp Changes to the command level for SMTP configuration
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be con-
Enters the configure-terminal level for the network.
Change to menu level for VIP configuration and status
Enters the WLAN profiles configuration level.
Stores the current configuration in permanent memory.
connect (tunnel-connect:2) level commands
block network disable Forwards (tunnels) network data in connect mode tunne-
Discards all data coming in from the connect mode tunnel
before forwarding
it to the serial interface (generally used for debugging).
Forwards (tunnels) serial data in connect mode tunneling.
Discards all data coming in from the serial interface before
forwarding
it to the connect mode tunnel (generally used for debug-
Enables the tunneling server to always establish tunneling
connections.
connect mode any character Enables the tunneling server to establish a tunneling con-
nection when a
character is received on the corresponding line (serial
Disables connect mode tunneling.
connect mode modem control asserted
Enables the tunneling server to make tunneling connec-
tions when the modem
connect mode modem emulation
Enables modem emulation for connect mode tunneling.
connect mode start character
Enables connect mode tunneling when the configured
