5: Commands and Levels
PremierWave XN Command Reference 154
show history Displays the last
20 commands entered during the current
CLI session.
Sets the threshold (byte count). If the queued data reach-
es this threshold
then the data will be sent.
<bytes> = number of bytes in the threshold.
timeout <milliseconds>
Sets the timeout value for packing mode in milliseconds.
<milliseconds> = timeout value, in milliseconds.
trailing character <control>
Sets the trailing character for packing mode.
The character may be input as text, control, decimal, or
hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
Stores the current configuration in permanent memory.
packing (tunnel-packing:1) level commands
Sets to default packing mode, which is "Disable"
Removes the send character for packing mode.
Restores the default threshold.
Restores the default packing mode timeout.
Returns to the tunnel level.
Removes the trailing character for packing mode.
packing mode disable Disables packing. Data is sent to the network when re-
packing mode send character
Sets packing mode to accumulate data and transmit it
upon receiving the
configured send character on the line (serial port).
Sets packing mode to accumulate data and transmit it
after a specified
amount of time (timeout).
Sets the send character for packing mode.
The character may be input as text, control, decimal, or
hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
threshold <bytes>
Sets the threshold (byte count). If the queued data reach-
es this threshold
then the data will be sent.
<bytes> = number of bytes in the threshold.
Sets the timeout value for packing mode in milliseconds.
<milliseconds> = timeout value, in milliseconds.
trailing character <control>
Sets the trailing character for packing mode.
The character may be input as text, control, decimal, or
hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
Stores the current configuration in permanent memory.
password (tunnel-accept-password:2) level commands
