5: Commands and Levels
PremierWave XN Command Reference 163
Enters the configure-terminal level for the network.
<line> = number of the tunnel line (serial port) to be confi-
Stores the current configuration in permanent memory.
vip (config-vip) level commands
Displays VIP counters continuously.
Displays VIP status continuously.
Sets the VIP counters to zero.
Exits to the configuration level.
Restores the VIP counters to the aggregate values.
Displays the current configuration.
Displays the VIP counters.
show history
Displays the last 20 commands entered during the current
CLI session.
Disables use of Virtual IP (VIP) addresses.
Enables use of Virtual IP (VIP) addresses.
Stores the current configuration in permanent memory.
wlan profiles (config-profiles) level commands
apply wlan Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
Create a new profile name
Delete existing profile by name
View or edit an existing profile
Exits to the config level.
Show existing profile names
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
Exits to the enable level.
Dump XML configuration containing secrets to the console
secret xcr dump <group list>
Dump specified XML configuration containing secrets to
the console
Save XML configuration containing secrets to a file
secret xcr export <file> <group list>
Save specified XML configuration containing secrets to a
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
Dump XML configuration to the console
Dump specified XML configuration to the console
<file>
Save XML configuration to a file
xcr export <file> <group list>
Save specified XML configuration to a local file
