A SERVICE OF

logo

DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install and Wire Telephones and Other Equipment
Page 5-76Add the Fiber Optic Cable
5
Figure 5-32. Remove the Fan Cover
Install the Pass-thru Kit
1. Snap the SC-SC fiber optic adapter on the pass-thru tool. See Figure 5-33.
Use the beige adapter even if single-mode fiber is being installed. The
SC-SC adapter is better suited for cable routing in the next steps.
NOTE:
If single-mode fiber is being installed, the beige adapter will be
replaced with a blue adapter, later in this section.
lcda3fop RPY021198