Advanced Settings
11
3. Composite (Composite Video Input)
It is possible to change assignment of input selector buttons and the COMPOSITE VIDEO
IN V1 to 3 jacks.
Setting Item Default Value Setting Details
BD/DVD ----- "VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to BD/DVD
button. If you do not assign a jack, select "-----".
CBL/SAT VIDEO 1 "VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to CBL/SAT
button. If you do not assign a jack, select "-----".
STB/DVR VIDEO 2 "VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to STB/DVR
button. If you do not assign a jack, select "-----".
GAME VIDEO 3 "VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to GAME button.
If you do not assign a jack, select "-----".
PC ----- "VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to PC button.
If you do not assign a jack, select "-----".
AUX FRONT You cannot change this setting.
TV/CD ----- "VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to TV/CD button.
If you do not assign a jack, select "-----".
4. Digital Audio (Digital Audio Input)
It is possible to change assignment of input selector buttons and the DIGITAL IN COAXIAL
1 to 2/OPTICAL jacks.
Setting Item Default Value Setting Details
BD/DVD COAXIAL 1 "COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to BD/DVD
button. If you do not assign a jack, select "-----".
CBL/SAT COAXIAL 2 "COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to CBL/SAT
button. If you do not assign a jack, select "-----".
Setting Item Default Value Setting Details
STB/DVR ----- "COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to STB/DVR
button. If you do not assign a jack, select "-----".
GAME ----- "COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to GAME
button. If you do not assign a jack, select "-----".
PC ----- "COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to PC button. If
you do not assign a jack, select "-----".
AUX ----- "COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to AUX button.
If you do not assign a jack, select "-----".
TV/CD OPTICAL "COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to TV/CD
button. If you do not assign a jack, select "-----".
Supported sampling rates for PCM signals (stereo, mono) from a digital input (optical and coaxial) are
32/44.1/48/88.2/96 kHz/16, 20, 24 bit.
5. Sp Config (Speaker Configuration)
Allows you to change the speaker configuration such as existence of subwoofer, crossover
frequency, and so on.
Setting Item Default Value Setting Details
Subwoofer Yes Set whether a subwoofer is connected or not.
"Yes": When subwoofer is connected
"No": When subwoofer is not connected
Front Small Allows you to specify the size of the front
speakers. Specify the size according to a cone
diameter.
"Small": When the cone diameter is less than
6-1/2 inches (16 cm)
"Large": When the cone diameter is greater than
6-1/2 inches (16 cm)
The setting is fixed to "Large" if "Subwoofer" is
set to "No".
