Advanced Settings
18
12. Bluetooth (Bluetooth Setup)
Setting Item Default Value Setting Details
Bluetooth On Enables/Disables the unit to pair with
Bluetooth-enabled device.
"On": Enables the Bluetooth function and allows
the unit to pair with Bluetooth-enabled device.
Set this function to "On" when configuring the
settings related to Bluetooth.
"Off": When not using the Bluetooth function.
Direct Change On Automatically changes the input selector to
"BLUETOOTH" when a Bluetooth-enabled
device is connected.
"On": To enable this function.
"Off": To disable this function.
When the input selector is not selected
automatically, set this function to "Off" and
change the input selector manually.
Auto Reconnect On Automatically reconnects to the Bluetooth-
enabled device connected last when you
change the input selector to "BLUETOOTH".
"On": To enable this function.
"Off": To disable this function.
This function may not work depending on
your Bluetooth-enabled device.
Pairing Info - This function initializes the information of a
previous pairing information stored in the unit.
Pressing ENTER when "Clear" is displayed
initializes the pairing information stored in this
unit.
This function does not initialize the pairing
information on the Bluetooth-enabled device.
When pairing the unit with the device again,
be sure to clear the pairing information on
the Bluetooth-enabled device in advance.
For information on how to clear the pairing
information, refer to the Bluetooth-enabled
device's instruction manual.
Setting Item Default Value Setting Details
Device - Displays the name of the Bluetooth-enabled
device connected to the unit.
The name is not displayed when "Status" is
"Ready" and "Pairing".
Status - Displays the status of the Bluetooth-enabled
device connected to the unit.
"Ready": Not paired
"Pairing": Paired
"Connected": Connected successfully
When you cannot select "Bluetooth", wait until the Bluetooth function is activated.
