Advanced Settings
14
Setting item Default Value Setting Details
Center Width (PLII
Center Width)
3 Configure the settings to use for playing any 2
ch digital source such as Dolby Digital, or 2-ch
analog/PCM source in the Dolby Pro Logic II
Music listening mode. Allows you to configure the
width of the sound from the center speaker.
"0" to "7": Smaller the setting value is,the sound
is gathered to the center, and larger the setting
value is, the sound is distributed to the front left
and right speakers.
Center Image
(Neo:6 Center
Image)
2 Allows you to configure the width of the front
sound field when playing in the DTS Neo:6 Music
listening mode.
"0" to "5": Smaller the setting value is, the front
sound field is gathered to the center, and larger
the setting value is, the front sound field is
distributed to the front left and right speakers.
Listening Angle Wide Set the angle of the front left and right speakers
relative to the listening position when playing in
the Theater-Dimensional listening mode.
"Narrow": Less than 30°
"Wide": Greater than 30°
Values recommended for "Listening Angle" are 20° when "Narrow" is selected, and 40° when "Wide"
is selected.
9. Source Setup
The setting can be separately set to each input selector button. Select the input selector to
configure.
Setting Item Default Value Setting Details
Name - Allows you to rename the currently selected input
selector for easy identification.
Same name cannot be set for multiple input
selectors. Moreover, a name cannot be
configured for the input selectors "AM", "FM",
"USB", and "BLUETOOTH".
Audio Selector - Allows you to select prior input source.
"ARC": When giving priority to input signal from
ARC compatible TV.
This setting can be selected when "Audio
Return Channel" is set to "Auto" and when
"TV/CD" is selected.
"HDMI": When giving priority to input signal from
HDMI jacks.
This setting can be selected only when the
input selector to set is assigned to the HDMI
IN jack in the "HDMI Input" setting.
"COAXIAL" (Coaxial input): When giving priority
to input signal from DIGITAL IN COAXIAL jacks.
This setting can be selected only when
the input selector to set is assigned to the
COAXIAL jack in the "Digital Audio (Digital
Audio Input)" setting.
"OPTICAL" (Optical input): When giving priority
to input signal from DIGITAL IN OPTICAL jack.
This setting can be selected only when
the input selector to set is assigned to the
OPTICAL jack in the "Digital Audio (Digital
Audio Input)" setting.
"Analog": To always output analog audio
independently of the input signal.
