AM/FM Radio Receiving Function/Playing Content from a USB Storage Device
4
3.
Press ENTER to search for the selected type of radio
station.
4.
When the desired radio station is found, the station
name on the display flashes. Then, press ENTER again.
"Not Found" is displayed if none is found.
■
Listening to Traffic Information (TP)
1.
Press RT/PTY/TP on the unit thrice.
The traffic information "[TP]" transmitted by the
radio station you are tuned in is displayed. "TP" is
displayed without square brackets when the radio
station is not transmitting traffic information.
2.
Press ENTER to search for a radio station transmitting
traffic information.
3.
When such a radio station is found, searching stops and
playing traffic information starts.
"Not Found" is displayed if none is found.
Playing Content from a USB
Storage Device
Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN.
■
Playback
1.
Press USB on the remote controller to select "USB".
2.
Plug your USB storage device with the music files into
the USB port of the unit, so that the "USB" lights on the
display.
If the "USB" indicator flashes, check whether the
USB storage device is plugged in properly.
Do not unplug the USB storage device while
"Connecting..." is displayed on the display. This may
cause data corruption or malfunction.
3.
Press ENTER.
The list of folders and music files on the USB storage
device are displayed. To open a folder, use cursor to
select it, and then press ENTER.
4.
Select the folder and file to play using the cursor
buttons, then press ENTER or to start playing.
