Front Panel
TDS 310, TDS 320 & TDS 350 Service Manual
2Ć3
The WAVEFORM OFF button
turns off the presently selected
waveform.
The Waveform Select buttons
display and select waveforms (CH1,
CH2, MATH, REF1, and REF2). A
light next to a button illuminates
when that waveform is selected.
Probe compensation output.
Connector to chassis ground.
The Vertical POSITION knob
controls the vertical position of
the presently selected waveform.
The VERTICAL MENU button calls
up the vertical operations menu.
The VOLTS/DIV knob controls the
vertical scale of the presently
selected waveform.
Vertical Controls
