Anton/Bauer LOGIC Series Battery Charger User Manual


 
- 15 -
SERVICE
In the unlikely event a DIGITAL battery fails to deliver acceptable
performance, it must be returned to the Anton/Bauer Service Department, the
only facility qualified and equipped to service the Logic Series DIGITAL
batteries and calibrate the electronic components and sensors. Any attempt by
the user or any other unauthorized persons to service this battery will surely
result in improper calibration of the electronic components resulting in severe
battery damage and/or safety hazards to the operator, in addition to voiding
any/all remaining unconditional or pro-rated warranty conditions. Therefore:
1. DO NOT attempt to service this battery under any circumstances.
2. DO NOT send this battery for service to anyone other than the
Anton/Bauer Service Department.
3. DO NOT rebuild this battery - At the end of its useful life contact the
Anton/Bauer Service Department.
4. DO NOT DISPOSE OF THIS BATTERY. This battery contains
sealed Nickel-Cadmium cells and must be disposed of properly.
Anton/Bauer participates in a recycle program that handles Nickel-
Cadmium battery products (see the back page of this manual).