Anton/Bauer LOGIC Series Battery Charger User Manual


 
- 5 -
APPLICATIONS
Virtually all cameras, camcorders, and other video field equipment
specifies a maximum voltage of 18 volts. The 14.4 volt DIGITAL battery
will provide superior performance and greater run time on that equipment.
CAUTION: Certain older equipment is not designed to accept 14.4
volt NiCad batteries. The 14.4 volt DIGITAL battery could damage
such equipment. Check with the equipment manufacturer or the
Anton/Bauer Customer Support Group prior to using a 14.4 volt
battery.
DIGITAL PROPAC
The Digital ProPac battery is the ideal source for all cameras and camcorders.
With an accessory Gold Mount Bracket, it can be used to power color
monitors, waveform monitors, vector scopes and virtually any other video
equipment designed to be operated from 12 volt DC power.
The Digital ProPac battery is also the preferred power source when using
the Anton/Bauer Ultralight or Ultralight 2 “on-camera” accessory light.
The Gold Mount Bracket features an integral “PowerTap” receptacle that
can power the Ultralight directly from the DIGITAL battery powering the
camera or camcorder.
DIGITAL TRIMPAC
The lightweight high energy Digital Trimpac battery is the ideal match for
the latest generation of smaller CCD cameras and camcorders. The
Digital Trimpac will provide excellent run times in applications
previously using slide-in type batteries. Run time improvements to 100%
are quite common with the Digital Trimpac.