Anton/Bauer LOGIC Series Battery Charger User Manual


 
- 2 -
INTRODUCTION
The Logic Series Digital Battery System couples the most advanced
NiCad battery and charging technology with the first and only capacity
measurement system in the industry.
The Anton/Bauer DIGITAL battery uses InterActive Logic Series
technology which includes sensors, a microprocessor controller and data
circuits in the battery to communicate with an Anton/Bauer charger as
well as video cameras for precise and dependable performance. The
microprocessor actually allows the battery to learn its capacity as it is
used, constantly updating the status of the fuel gauge. This unique “self-
calibrating” or “learning” function is only available with Anton/Bauer
batteries.
When used in conjunction with the Anton/Bauer InterActive 2000
PowerChargers, the LCD on the charger provides a “window” into the
battery - displaying all the critical battery information and status essential
for maintaining peak performance of any type of video field equipment.
FEATURES
1. Microprocessor Fuel Computer - Accurately monitors the energy put
into and taken out of the battery. This data is processed with
sophisticated programs that take into account battery age, self discharge,
charge/discharge rate, cell imbalance and previously experienced
charge/discharge cycles. The DIGITAL battery constantly “learns” its
precise state of charge and remaining capacity. This data is
automatically transmitted to an InterActive charger.
2. Integral ‘LCD’
- Accurately displays the percentage of remaining
battery capacity.