Anton/Bauer LOGIC Series Battery Charger User Manual


 
- 1 -
IMPORTANT
The Logic Series DIGITAL battery has been specifically designed to
be charged with the Anton/Bauer Logic Series InterActive Chargers
ONLY (any InterActive 2000 PowerCharger, MP-4D, Quad, Dual,
MP-2, Q2, ABC-800H or CPS-2). These Chargers were developed in
anticipation of the DIGITAL battery and include the proper
DIGITAL interface circuitry.
Since all programming is contained on one single EPROM chip, earlier
Logic Series Charger models already in the field may not contain the
latest DIGITAL software. The DIGITAL batteries will simply require
a new EPROM chip to set up complete communication.
Replacement EPROM chips are available by contacting the
Anton/Bauer Customer Support Group at 1-800-541-1667 or 203-929-
1100 or fax 203-929-9935.
THE DIGITAL BATTERY CAN
NOT BE USED WITH
STANDARD ANTON/BAUER LIFESAVER CHARGERS (LSQ4,
LSFC, LSQC, etc.) OR NON-ANTON/BAUER CHARGERS. Call
the Anton/Bauer Customer Support Group if there is any question of
charger compatibility.