Filter
Top Products
NOTE: The camera ID for camera 1 is ‘greyed’ and cannot be edited.
More detailed information about defining cameras is given later in this sec-
tion. After defining the overview camera, it is necessary to save the setting.
To do so:
• Click on the ‘Insert’ button.
The overview camera information will appear in the ‘Assignments’ list of
the Camera Installation window. The next seat or unit number which has
not yet been assigned to a camera will appear in the edit fields of the Cam-
era Installation window.
Selecting a seat (or unit) number
In DCN systems with PC control, the DCN Automatic Camera Control
software takes the seat numbers from the current installation file. In DCN
systems with a stand-alone CCU, the DCN Automatic Camera Control
software uses ‘unit’ numbers instead of ‘seat’ numbers.
To enter or change the camera control settings for a delegate’s contribution
unit, it is first necessary to select that unit’s seat or unit number. There are
two ways of selecting a seat or unit number.
The DCN Automatic Camera Control software will automatically propose
a seat or unit number in the ‘Seat nr:’ edit field of the Camera Installation
window. It is possible to accept this number, or to change it using the up
and down arrow keys of the edit field.
Alternatively, it is possible to press the microphone button or any of the soft
keys on a contribution unit. This will automatically result in the seat or unit
number and any other entered parameters appearing in the Camera Installa-
tion window.
NOTE: Selecting a seat or unit number causes the LEDs of the soft keys, and
the microphone LED on the corresponding contribution unit to flash.
NOTE: After pressing the ‘Insert’ push button, the software automatically
loads the next seat or unit number which has not been assigned to a camera.
The total number of seats (or units) which have not yet been assigned to a
camera is displayed in the Camera Installation main window in the lower
right-hand corner:
‘n seats without camera assignment’
Digital Congress Network DCN Automatic Camera Control
Page 3-7 Software User Manual
USING DCN AUTOMATIC CAMERA CONTROL
3