Bosch Appliances LBB 3588 Welding System User Manual


 
Where ‘n’ is the number of seats (or units).
Only seat (or unit numbers) without camera assignment can be selected.
NOTE: During installation, the audience monitor continues to show the
image from the overview camera, except in one-camera configurations where
it will show the same view as the operator monitor. The operator monitor
shows the selected camera picture.
Selecting camera number
To continue with the camera installation, a camera number should be
assigned to each seat or unit number. To do so:
Select the number of the camera you want to assign.
Editing camera ID
Each camera can have a descriptive ID (maximum 16 characters) entered in
the ‘Camera ID:’ edit field. This, for example, could be used to give each
camera a descriptive ID relating to the position of the camera in the confer-
ence venue. This text appears on the operator monitor but not on audience
monitors.
To enter or edit the camera ID:
Select the ‘Camera ID’ edit field.
Enter the required text.
USING DCN AUTOMATIC CAMERA CONTROL
DCN Automatic Camera Control Digital Congress Network
Software User Manual Page 3-8
3
Fig.7 Camera ID editing