Campbell Hausfeld GR3000 Welding System User Manual


 
Safety Guidelines
This manual contains information
that is very important to know
and understand. This information
is provided for SAFETY and to
PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger indicates
an imminently
hazardous situation which, if not avoided,
WILL result in death or serious injury.
Warning indicates
a potentially
hazardous situation which, if not avoided,
COULD result in death or serious injury.
Caution indicates
a potentially
hazardous situation which, if not avoided,
MAY result in minor or moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
IMPORTANT: Information that
requires special attention.
Safety Symbols
The following Safety Symbols appear
throughout this manual to alert you
to important safety hazards and
precautions.
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Important Safety Information
This manual contains important safety, operational and maintenance information.
If you have any questions, please call 1-800-746-5641 for customer assistance.
CALIFORNIA PROPOSITION 65
This product contains and / or produces chemicals,
including lead, known to the State of California to cause
cancer and birth defects or other reproductive harm.
EMISSIONS
Engines that are certified to comply
with U.S. EPA emission regulations
for SORE (Small Off Road Equipment), are certified to
operate on regular unleaded gasoline, and may include
the following emission control systems: (EM) Engine
Modifications and (TWC) Three-Way Catalyst (if so
equipped).
Using a generator indoors CAN KILL
YOU IN MINUTES. Generator exhaust
contains carbon monoxide. This is a poison you cannot see or
smell.
NEVER use inside a house or garage, EVEN IF doors and windows are open.
Only use OUTSIDE and far away from windows, doors and vents.
GENERAL SAFETY
Before starting or servicing any unit, read and understand all
instructions. Failure to follow safety precautions or instructions can
cause equipment damage and or serious personal injury or death.
Engine instructions for these units are contained in a separate manual.
Retain all manuals for future reference.
Wear safety glasses and use hearing protection when operating the unit.
Never operate this unit in an explosive, flammable and / or
combustible atmosphere.
Never use this unit for any application other than that specified by the
manufacturer. Never operate this unit under conditions not approved by
the manufacturer. Never attempt to modify this unit to perform in any manner not
intended by the manufacturer.
If the equipment should start to vibrate abnormally, STOP the engine / motor and
check immediately for the cause. Vibration is generally a warning of trouble.
For maintenance and repairs, use only products and parts recommended by the
manufacturer.
Be sure that the unit is properly grounded to an external ground path prior to
operation. Refer to the section entitled “Grounding Instructions” for proper
grounding procedures.
Be sure that the unit is operated only by persons who have read and understand
these instructions.
Be sure that the unit is placed on a flat level surface prior to and during operation.
The unit must not slide or shift during operation.
Operating Instructions
www.campbellhausfeld.com
2
MANUAL
MANUAL
Read Manual
First
Wear Eye
and Ear
Protection
Wear Eye
and Mask
Protection
Risk of
Fumes
Risk of
Magnetism
Risk of
Pressure
Risk of
Electrocution
Risk of Flying
Fragments
Risk of
Explosion
Risk of Light
Rays
Risk of
Hot Parts
Risk of Fire