Filter
Top Products
SKU 47606 For technical questions, please call 1-800-444-3353. Page 3
damaged, have them repaired by an authorized technician. The handles must be kept clean,
dry, and free from oil and grease at all times.
Disconnect power. Unplug tool when not in use.
Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are
removed from the tool or machine work surface before plugging it in.
Avoid unintentional starting. Be sure the switch is in the Off position when not in use and
before plugging in. Do not carry any tool with your nger on the switch, whether it is plugged in
or not.
The Rotary Hammer must be switched off and unplugged before changing the Knob
setting. Attempting to change the Knob setting while the motor is engaged will result in abrupt
bit rotation and can cause serious personal injury and/or property damage.
Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you
are tired.
Take caution as some woods contain preservatives such as copper chromium arsenate
(CCA) which can be toxic. When drilling or chiseling these materials extra care should be
taken to avoid inhalation and minimize skin contact.
Check for damaged parts. Before using any tool, any part that appears damaged should be
carefully checked to determine that it will operate properly and perform its intended function.
Check for alignment and binding of moving parts; any broken parts or mounting xtures; and
any other condition that may affect proper operation. Any part that is damaged should be
properly repaired or replaced by a qualied technician. Do not use the tool if any switch does
not turn On and Off properly.
Guard against electric shock. Prevent body contact with grounded surfaces such as pipes,
radiators, ranges, and refrigerator enclosures.
Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty. Only use accessories intended for use with this
tool. Approved accessories are available from Harbor Freight Tools.
Do not operate tool if under the inuence of alcohol or drugs. Read warning labels on
prescriptions to determine if your judgment or reexes are impaired while taking drugs. If there
is any doubt, do not operate the tool.
Use proper size and type extension cord. If an extension cord is required, it must be of the
proper size and type to supply the correct current to the tool without heating up. Otherwise,
the extension cord could melt and catch re, or cause electrical damage to the tool. This tool
requires use of an extension cord of 0 to 10 amps capability (up to 50 feet), with wire size rated
at 18 AWG. Longer extension cords require larger size wire. If you are using the tool outdoors,
use an extension cord rated for outdoor use (signied by “WA” on the jacket).
Maintenance. For your safety, maintenance should be performed regularly by a qualied
technician.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities, contain chemicals known [to the State of California] to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
REV 07c