Filter
Top Products
SKU 92496 PAGE 9
5. IMPORTANT! The Pressure Adjusting Screw (18) on the Acetylene Regulator and
the Pressure Adjusting Screw (A18) on the Oxygen Regulator should be opened
slightly by turning counterclockwise to relieve pressure on the Regulator diaphragms
before opening the cylinder valves. If this is not done, pressure from the cylinders
may damage the diaphragms and render the Regulators inoperable.
RED
ACETYLENE
REGULATOR
(parts 1-19)
GREEN
OXYGEN
REGULATOR
(PARTS A1-A20E)
PRESSURE
ADJUSTING
SCREW
(18)
PRESSURE
ADJUSTING
SCREW
(A18)
CYLINDER
VALVE
CYLINDER
VALVE
ACETYLENE
CYLINDER
(NOT INCLUDED)
OXYGEN
CYLINDER
(NOT INCLUDED)
RED
WELDING
HOSE
(D1A)
GREEN
WELDING
HOSE
(D1B)
6. Connect the GREEN and RED Welding Hoses (D1A, or D1B) to the proper con-
nections on the Torch Handle (parts B1-B10).
WARNING! If any traces of oil or grease are found, do not use. Contact
TORCH
HANDLE
(PARTS B1-B10)
CUTTING
ATTACHMENT
(PARTS C1-C27)
WELDING NOZZLE (D4),
OR CUTTING NOZZLE (D6)
FIGURE E
REV 08g