Filter
Top Products
UNPACKING YOUR MITER SAW
[A WARNING[
To avoid injury from unexpected starting or
electrical shock, do not plug the power cord into a
source of power during unpacking and assembly.
The cord must remain unplugged whenever you are
adjusting/assembling the saw.
I. Remove the miter saw from the carton.
IMPORTANT: Do not lift the miter saw by the
switch handle or miter table handle. It may cause
misalignment. Lift only by the built-in carrying handles
located at the top of the machine.
,
3.
Place the saw on a secure stationary work surface.
Separate all parts from the packing material. Check
each one with the illustration below to make certain
all items are accounted for before discarding any
packing material.
IA WARNING[
If any part is missing or damaged, do not attempt
to assemble the miter saw, or plug in the power
cord until the missing or damaged part is correctly
replaced. To avoid electric shock, use only identical
replacement parts when servicing double insulated
tools. Call 1-800-4-MY-HOME e for replacement parts.
Miter Saw
Blade Wrench
Dust Bag Hold-Down Clamp Miter Handle