Filter
Top Products
LED WORKLIGHTS (Fig° 8)
Your router motor has 3 built-in
work lights located around the
collet/nut to provide high vis-
ibility of work piece when cut-
ting. These lights are always
"On" when the toggle switch is
in the "On" position.
"LIVE TOOL INDICATOR"
LIGHT (Fig. 9)
"{-our router also has a "LIVE
TOOL INDICATOR" green light,
located on the router motor
top cap where the power cord
enters the router motor. This
green light is always on when
router motor is plugged into
power source.
HEAVY-DUTY EDGE
GUIDE (Fig° 10)
Your Fixed Base Router comes
with a Heavy-Duty Edge
Guide. This edge guide can be
used as an aid in routing ap-
plications such as decorative
edging, straight-edge planing
and trimming, grooving, dado-
ing and slotting.
To assemble onto fixed or
plunge bases, simply insert
edge guide rods into edge
guide mounting slots, adjust
to desired position, and lock
down with the edge guide
locking knobs_
Fig_ 8
'i
Fig. 9
Using edge-guide with fixed base for intema] cuts
!
28190 Manual Revised_07©409
I
I
Page 22