Filter
Top Products
7
Fig. 5
16. Stand with Pre-Wired Switch
17. Dust Chute
18. V-Belt
19. Pulley
20. M10x1.5x20mm Hex Socket Head Screw (3)
21. M8x1.25x55mm Hex Socket Head Screw (4)
22. M8x1.25x30mm Hex Socket Head Screw (2)
23. M8x1.25x25mm Hex Socket Head Screw (2)
24. M8x1.25x20mm Hex Socket Head Screw (2)
25. 5/16-18x1" Hex Head Screw (1)
26. #10-16x1/2" Sheet Metal Screw (4)
27. M10 Flat Washer (3)
28. 11/32" Flat Washer (1)
29. M8 Flat Washer (10)
30. M10.2 Lockwasher (3)
31. M8.1 Lockwasher (10)
32. 5/16" Lockwasher (1)
33. M8x1.25 Hex Nut (2)
34. 5/16-18 Hex Nut (1)
35. Key
ASSEMBLY
FOR YOUR OWN SAFETY, DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL
THE MACHINE IS COMPLETELY ASSEMBLED AND YOU READ AND UNDERSTAND THE ENTIRE
INSTRUCTION MANUAL.
STAND AND ELECTRICALS
Your Jointer stand (A) Fig. 6, is shipped with the motor
and switch completely wired, and the motor mounted.
Fig. 6
A
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35