Filter
Top Products
FIG.3
5
English
FIG. 4
Specifications
CAPACITY OF CUT
50° miter left, 60° miter right
48˚ bevel left and right
US Models Non-US Models
Miter Bevel Max Max Max Max
Height Width Height Width
____ _____ ______ _____ ______ _____
0° 0° 4.7" 12" 4.5" 12"
45 L&R° 0° 4.7" 8.5" 4.5" 8.5"
0° 45° L 3.2" 12" 2.9" 12"
0° 45° R 1.7" 12" 1.7"` 12"
DRIVE
120 Volt Motor
2200 Watts
15 Amp Motor
4000 RPM
Cut Helical Gears with Roller Bearings
Multi-V Belt
60 Tooth Carbide Blade
Automatic Electric Brake
Optional Attachments/Accessories
Recommended accessories fo use with your tool are
available at extra cost from you local service center. If you
need any assistance regarding blades or accessories, please
contact D
EWALT Industrial tool co., 701 East Joppa Road,
Baltimore, MD 21286 or call 1-800-4-D
EWALT (1-800-433-
9258).
WARNING: For safe operation, read instruction literature
included with attachments/accessories.
MITER SAW WORKSTATION: DW723
The workstation allows you to adjust the position of your miter
saw quickly and easily. It comes with a workpiece support and
a length stop.
EXTENSION KIT: DW7080
Used to support long overhanging workpieces, the work
support is user assembled. Your saw table is designed to
accept two work supports; one on each side. One set stores
conveniently under the saw table.
ADJUSTABLE LENGTH STOP: DW7051
Requires the use of one work support detailed above). It is
used to make repetitive cuts of the same length from 0 to 42"
(0 to 106 cm).
MATERIAL CLAMP: DW7082
This accessory is used for firmly clamping workpiece to the
saw table for precision cutting.
CROWN STOP: DW7084
This accessory is used for precision cutting of crown molding.
DUST BAG: DW7053 (SOME MODELS)
The dust bag is equipped with a zipper for easy emptying.
BASE STABILIZER
(NOT SHOWN)
TRIGGER SWITCH
SPINDLE LOCK BUTTON
KERF PLATE
MOTOR END CAP
OPERATING HANDLE
BLADE GUARD
BLADE WRENCH
BEVEL
ADJUSTMENT/LOCK
HANDLE
BEVEL STOP SCREWS
MITER ADJUSTMENT/LOCK
HANDLE
DETENT
TRIGGER
DUST SPOUT
ARBOR COVER
LOCK DOWN PIN
MITER SCALE
TABLE
BASE
HAND HOLDS
FENCE
BELT COVER SCREW
BELT COVER
GROOVING STOP
FENCE ADJUSTMENT
KNOB (NOT SHOWN)
BENCH MOUNTING HOLES
THUMBSCREW
RAILS
LIFTING
HANDLE
RAIL LOCK KNOB
BEVEL STOP
OVERRIDE