Filter
Top Products
DSL-G624T Wireless A DSL Router User’s Guide
QoS
QoS or Quality of Service is used to allot priority from the router. This is done by allotting a priority from a port to a
PVC as shown in the screen below. There are four priorities for each QoS configuration. 1 denotes the highest priority
while 4 is the lowest.
The IGMP Proxy/Snooping is Disabled by default. This setting will not allow IGMP (Internet Group Management
Protocol) packets to be forwarded to the LAN. IGMP is used to manage multicasting on TCP/IP networks, most users
will not need to enable this. Some ISPs use IGMP to perform remote configuration for client devices, such as the
Router. If you are unsure, check with your ISP. To enable IGMP service to the LAN interface, select Enabled and click
the Apply button.
QoS Configuration screen
To set QoS for the router, first click the Enable Port based QoS check box at the top of the screen. Then select the
PVC to associate with the corresponding port and choose a priority for this combination. The user may also enable
IGMP Proxy/Snooping for each PVC at the bottom of the screen by choosing the PVC from the pull-down menu and
clicking the Enabled radio button. Click Apply to set the configuration.
65