Filter
Top Products
42
Noise rejection : 60 Hz
Exit Edit
MODEL 54eA SECTION 5.0
SOFTWARE CONFIGURATION
5.10 NOISE REDUCTION
1. For maximum noise reduction the frequency of the ac power must be entered into the analyzer.
Temperature
Noise rejection
Main sensor cal
Exit Enter
2. Press any key to enter the main menu. Move the cursor to "Program"
and press Enter (F4).
3. Move the cursor to "Configure" and press Enter (F4).
4. Move the cursor to "Noise rejection" and press Enter (F4).
5. To change the frequency setting, press Edit (F4). Use the é key to
toggle between 50 and 60 Hz. Press Save (F4) to store the change.