Filter
Top Products
StartPointType Property
StartPointType Property
Applies To
Vision Objects: Edge, Line
Description
Specifies the type of start point to use for the line object. In most cases the start point type will be a point
(which usually means the PixelX and PixelY position of the StartPointObject). However, when the
StartPointObject for the current line is a 2nd Line object, the StartPointType property is used to define an
intersection point on the 2nd line such as the lines midpoint, endpoint, startpoint or perpendicular position.
Usage
VGet Sequence.Object.StartPointType, var
VSet Sequence.Object.StartPointType, value
Sequence Name of a sequence or string variable containing a sequence name.
Object Name of an object or string variable containing an object name. The object must exist in the
specified sequence.
var Integer variable that will contain the value of the property.
value Integer expression for the new value of the property.
Values
StartPointObject = Line
StartPointObject = Screen, Blob, Correlation, Geometric, Edge, or
Point object
See remarks.
Default: 2 - MidPoint
0 - Point
When used with objects other than the Line object, the StartPointType can
only be of type 0 - Point.
Default: 0 - Point
164 Vision Guide 5.0 Reference (Ver.5.3) Rev.1