Filter
Top Products
AngleOffset Property
AngleOffset Property
Applies To
Vision Objects: Polar
Description
An angle value which is used as an offset to line up the Polar Search direction indicator (graphic line on the
image display) with the part since it is virtually impossible and normally impractical to teach a polar object
with the proper rotation of a part so that the direction lines up with the part.
Usage
VGet Sequence.Object.AngleOffset, var
VSet Sequence.Object.AngleOffset, value
Sequence Name of a sequence or string variable containing a sequence name.
Object Name of an object or string variable containing an object name. The object must exist in the
specified sequence.
var Real variable that will contain the value of the property.
value Real expression for the new value of the property.
Values
Real number in degrees from 0 - 360
Default: 0
Remarks
The AngleOffset is provided to allow the Polar object's graphic direction indicator to line up with a specific
area on a part. The graphic direction indicator is normally set at the default position for the polar object
which is 0 degrees (at 3 O'clock). The rotation for the AngleOffset property is then defined in a counter
clockwise direction.
See Also
Object Tab, Polar Object
Vision Guide 5.0 Reference (Ver.5.3) Rev.1 11