Epson 5 Welding System User Manual


 
TRADEMARKS
Microsoft, Windows, Windows logo, Visual Basic, and Visual C++ are either
registered trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
Other brand and product names are trademarks or registered trademarks of the
respective holders.
TRADEMARK NOTIFICATION IN THIS MANUAL
Microsoft® Windows® XP Operating system
Microsoft® Windows® Vista Operating system
Throughout this manual, Windows XP, and Windows Vista refer to above respective
operating systems. In some cases, Windows refers generically to Windows XP, and
Windows Vista.
NOTICE
No part of this manual may be copied or reproduced without authorization.
The contents of this manual are subject to change without notice.
Please notify us if you should find any errors in this manual or if you have any
comments regarding its contents.
INQUIRIES
Contact the following service center for robot repairs, inspections or adjustments.
If service center information is not indicated below, please contact the supplier office
for your region.
Please prepare the following items before you contact us.
- Your controller model and its serial number
- Your manipulator model and its serial number
- Software and its version in your robot system
- A description of the problem
SERVICE CENTER
Vision Guide 5.0 Reference (Ver.5.3) Rev.1 iii