Epson 5 Welding System User Manual


 
Y1 Property
Y1 Property
Applies To
Vision Objects: Edge, Line
Description
Defines the Y1 coordinate of an object where the (X1, Y1) coordinate pair defines the position of the
starting point of the object.
Usage
VGet Sequence.Object.Y1, var
VSet Sequence.Object.Y1, value
Sequence Name of a sequence or string variable containing a sequence name.
Object Name of an object or string variable containing an object name. The object must exist in the
specified sequence.
var Integer variable that will contain the value of the property.
value Integer expression for the new value of the property.
Values
Min: 0
Max Video height- 1
Remarks
There are cases where the user may want to position a Point object dynamically and for that reason the Y1
property can also be set from the SPEL
+
Language.
Line Object:
The Y1 property is used to locate vertical position for the starting point of a Line object. This property is
initially set to the Y position where the user drops a newly created Line object. However, if a Point object
is associated with another object in the sequence (i.e. the StartPointType property is set to another vision
object and not set to Screen), then the Y1 property for the Line object is automatically modified according
to the associated property.
When the StartPointType property is set to Screen there are 2 methods which can be used to move the Line
object:
- Click on the Line object's label and drag the object to the position you want to place it.
- Change the X1, Y1, X2, or Y2 coordinates.
Edge Object:
The Y1 property is used to locate veritical position for the starting point of an Edge object.
See Also
Edge Object, Line Object, Object Tab, StartPointObject property, StartPointType property, X1 property,
X2 property, Y2 property
194 Vision Guide 5.0 Reference (Ver.5.3) Rev.1