Filter
Top Products
Instruction Manual 23
Container) Systainer (System
Every Festool product is shipped in its own unique syste ainer, called a "Systainer". This provides protection and
storage for the tool and accessories. All Systainers are stacka
locking atop Festool dust extractors.
m cont
ble and can be interlocked together, including stacking and
Stacking Systainers
F r convenience in transporting Festool tools and o
accessories, the systainers can be stacked and locked
together. The systainers are locked together using the
stacking t
1.
2. r by pulling
3. four latches upward (step B) as depicted by the
two views.
4. (step C) so
tainer.
The lower image to the right shows two accessory systainers
st
abs and latches.
Place one systainer on top of the other.
Release all four latches on the lower systaine
back at their top edges (step A to the right).
Slide all
Snap all four latches back to their flat position
they engage the stacking tabs of the upper sys
acked together.
Parts of the Systainer
► Carrying Handle. The carrying handle folds flat when not
in use.
► Cover Latches. The two green latches on the front of the
Systainer secure the cover. (These are also used for
stacking Systainers, as described below.)
► Stacking Latches. The two gray latches on the sides of the
Systainer are used for stacking one or more systainers
together.
► Stacking Tabs. The stacking tabs are used to lock two
systainers together. There are four sets of tabs (two on the
front and two on the sides) of each systainer.