Startup
10 332161A
Spray Test Pattern
1. Spray test pattern. Adjust pressure to eliminate
heavy edges.
2. Use smaller tip size if pressure adjustment cannot
eliminate heavy edges.
3. Hold gun perpendicular, 10-12 in. from surface.
Spray back and forth; overlap by 50%.
4. Trigger gun before moving. Release before stop-
ping. For additional spraying information, see gun
manual 311861.
Clearing Clogs
1. Release trigger, put safety ON. Rotate Spray Tip.
Take safety OFF. Trigger gun to clear clog.
2. Put safety ON. Return Spray Tip to original position.
Take safety OFF and continue spraying.
Heavy
Edges
ti20413a
ti20405a
ti20404a
ti20409a
ti20419a
ti20410a
ti20404a
ti20419a