Cleanup
332161A 13
6. Turn on water. Rinse paint off suction tube, prime
tube and inlet screen. Close valve.
7. Connect shutoff valve and garden hose to suction
tube. Leave prime tube in waste pail.
8. Turn Spray-Prime/Drain valve to SPRAY.
9. Open lever on shut-off valve.
10. Turn Pressure Control knob 1/4 turn clockwise.
NOTE: Step 11 is for returning paint in hose back to
paint pail. One 50-ft (15-m) hose holds approxi-
mately 1-quart (1-liter) of paint.
11.
Remove paint from hose.
a. Pull and hold gun trigger. Point gun into paint
pail.
b. Turn power switch ON to begin pumping paint in
hose back into paint pail.
c. When water comes out of gun, continue to trig-
ger gun, aiming gun into waste pail.
12. Continue triggering gun into waste pail for 1-2
minutes, until relatively clear water comes out of
gun.
13. Turn Spray-Prime/Drain valve to PRIME.
ti9413a
ti10443a
ti20407a
ti10447a
1/4 turn
ti20418a
ON
OFF
ti5303a
ti20411a
ti20412a
ti20406a