Filter
Top Products
Setup
8 332161A
Setup
1. Connect Graco airless hose to sprayer. Tighten
securely.
2. Connect other end of hose to gun.
3. Tighten securely.
4. Remove tip guard.
5. Check inlet strainer for clogs and debris.
6. Fill throat packing nut with TSL to prevent
premature packing wear. Do this each time you
spray.
7. Turn power OFF.
8. Plug power supply cord into a properly grounded
electrical outlet.
9. Turn prime valve down.
10. Place siphon tube set in grounded metal pail
partially filled with flushing fluid. See Grounding,
page 7. Do steps 1- 6 of Startup, page 9, to flush
out storage oil shipped in sprayer. Use water to
flush water-based paint or mineral spirits to flush
oil-based paint and storage oil.
ti20402a
ti20401a
ti20415a
ti20408a
ti5301a
ti5735b
ti3307a
ti5316a
/.
/&&
TIA
ti20406a
ti5856a
Flush