Graco 262906 Paint Sprayer User Manual


 
Pressure Relief Procedure
6 332161A
Pressure Relief Procedure
Follow the Pressure Relief Procedure whenever
you see this symbol.
1. Turn pressure control to lowest pressure.
2. Hold gun against side of grounded metal flushing
pail. Trigger gun to relieve pressure.
3. Turn prime valve down. If you suspect spray tip or
hose is clogged or pressure is not fully relieved,
VERY SLOWLY loosen tip guard retaining nut or
hose end coupling to relieve pressure. Then loosen
completely.
4. Turn power switch OFF, if unit is being shut down or
will be left unattended.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as skin injection, splashing
fluid and moving parts, follow the Pressure Relief Pro-
cedure when you stop spraying and before cleaning,
checking, or servicing the equipment.
ti20417a
ti20417a
ti20406a
ti5316a
/.
/&&