Filter
Top Products
Daily Gun Maintenance
14 310692D
Daily Gun Maintenance
General maintenance
✓ Relieve the pressure.
✓ Clean the fluid and air line filters daily.
✓ Check for any fluid leakage from the gun and fluid
hoses.
✓ Flush the gun before changing colors and whenever
you are done operating the gun.
WARNING
Follow Pressure Relief Procedure, page 13 when
you stop spraying and before cleaning, checking, ser-
vicing, or transporting equipment. Read warnings,
page 3.
CAUTION
Methylene chloride with formic or propionic acid is not
recommended as a flushing or cleaning solvent with
this gun as it will damage aluminum and nylon compo-
nents.
CAUTION
Solvent left in gun air passages could result in a poor quality paint finish. Do not use any cleaning method which
may allow solvent into the gun air passages.
Do not point the gun up while cleaning it.
Do not immerse the gun in solvent.
Do not wipe the gun with a cloth soaked in solvent;
ring out the excess.
Do not use metal tools to clean the air cap holes as
this may scratch them; scratches can distort the
spray pattern.