Filter
Top Products
Daily Gun Maintenance
310692D 15
Flushing and cleaning
Gravity and Siphon Feed Guns
1. For packages that include fluid cups, use the follow-
ing chart for flushing and cleaning instructions.
2. Continue to step 8 to perform daily cleaning of the
Delta Spray XT gun.
Pressure Feed Guns
1. Relieve the pressure, page 13.
2. Disconnect the fluid supply hose and air supply
hose from the gun.
3. Connect the solvent supply hose to the gun.
4. Hold metal part of gun against a grounded metal
container, trigger, and flush the gun with solvent
until all traces of paint are removed from the gun
passages.
5. Turn off the solvent supply.
6. Relieve the pressure.
7. Disconnect the solvent supply hose from the gun.
Cup attachment Instruction Manual
3M
™
PPS
™
310693
Gravity Cup 308792
Siphon Cup 308792
Pressure Cups 308791
WARNING
Follow Pressure Relief Procedure, page 13 when
you stop spraying and before cleaning, checking, ser-
vicing, or transporting equipment. Read warnings,
page 3.
F
IG. 13
ti4945a
ti4944a
FIG. 14
F
IG. 15
F
IG. 16
ti4854a
ti4836a
ti4944a