Graco 334558C Paint Sprayer User Manual


  Open as PDF
of 65
 
Setup
14 334558C
Setup
Change Engine or Motor
1 Turn motor OFF and unplug or turn
engine switch OFF. Loosen belt guard
knob and motor clamp. Perform
Pressure Relief Procedure, page 13.
2 Lift belt guard. Remove belt. Tilt
engine/motor and remove
engine/motor.
3 Tilt engine/motor. Install engine/motor.
Install belt. Lower belt guard.
4 Swivel motor clamp. Tighten motor
clamp and belt guard knob.
WLE
ti5382a
ti5405a
OFF
ON
ti5384a
WLD
ti5235a
WLD
WLD
WLD
ti5387a
ti5389a
 previous next