Filter
Top Products
Startup
334558C 19
9. Inspect for leaks. If leaks occur, turn
sprayer OFF immediately. Perform
Pressure Relief Procedure, page 13.
Tighten leaky fittings. Repeat Startup
procedure steps 2-8. If no leaks,
continue to trigger gun until system is
thoroughly flushed.
10. Place siphon tube in paint pail.
11. Trigger gun again into flushing fluid pail
until paint appears.
High-pressure spray is able to inject toxins
into the body and cause serious bodily
injury. Do not stop leaks with hand or rag.
PAINT
ti5255a
FLUSH
WLD