Filter
Top Products
Startup
334558C 17
Startup
1. Place suction tube and drain tube in
grounded metal pail partially filled with
flushing fluid. Attach ground wire to pail
and to earth ground.
2. Turn prime valve down to DRAIN
position. Turn pressure control
counterclockwise to lowest pressure.
3. Set hydraulic pump valve OFF.
4. If using electric motor, plug cord into
outlet and turn switch to ON.
5. If using gas engine, start engine.
a. Move fuel valve to open.
b. Move choke to closed.
c. Set throttle to fast.
PAINT
FLUSH
WLD
WLE
ti8689a
ti5248a
ti5249a
ti5250a
ti4296b