Graco 3A0420T Paint Sprayer User Manual


 
Technical Data
3A0420T 57
Technical Data
XP Proportioners
U.S. Metric
Maximum Fluid Working Pressure See Models section beginning on page 11.
Maximum Air/Hydraulic Oil Working Pressure See Models section beginning on page 11.
Combined Fluid Output (cc/cycle) See Models section beginning on page 11.
Pressure Ratio See Models section beginning on page 11.
Fluid Flow at 40 cpm See Models section beginning on page 11.
Hydraulic Fluid Consumption (XP-h models only) 0.2 gallons per cycle 0.76 liters per cycle
Air inlet size 3/4 npsm(f)
Maximum air pressure supply to the system 175 psi 12 bar, 1 MPa
Fluid pump inlets without hoppers 1-1/4 in. npsm(m)
Fluid gauge manifold outlets 1/2 in. npt(f)
Fluid mix manifold inlets 1/2 in. npt(f) ball valves
Mix manifold material outlet 1/2 in. npt(f)
Maximum feed pressure from remote source 250 psi 17 bar, 1.7 MPa
Sound pressure 86 dBA at 100 psi (7 bar, 0.7 MPa)
Sound power 98 dBA at 100 psi (7 bar, 0.7 MPa)
Maximum Storage Time 5 years (To maintain original performance, replace soft
seals after 5 years of inactivity.)
Maximum Lifetime Indefinite with recommended maintenance and periodic
rebuilds for critical parts.
Power Efficiency Factor (XP70) 75 cu. ft compressed air/1 gallon sprayed material at 100 psi
2.12 m
3
compressed air/1 liter sprayed material at 7 bar
(0.7 MPa)
Air consumption per 1 gallon (3.78 l) of flow
XP70
75 scfm at 100 psi/gpm (2.12 m
3
/min at 7 bar, 0.7 MPa)
XP50
60 scfm at 100 psi/gpm (1.7 m
3
/min at 7 bar, 0.7 MPa)
XP35
50 scfm at 100 psi/gpm (1.42 m
3
/min at 7 bar, 0.7 MPa)
Filtration:
Air inlet filtration 40-micron filter/separator included
XP pump outlets 30 mesh
XTR Spray Gun 60 mesh
Fluid Viscosity Range:
Gravity feed with 7 gallon (26 liter) hoppers 200 to 20,000 cps (pourable)
Pressure feed Any viscosity that will not require feed pressure more than
15% of outlet pressure
Environmental Rating (Indoor/outdoor)
Hazardous Areas EX II 2 G c IIA T2
NOTE: XP-h pump packages (284xxx) are not Ex rated.
Ambient Temperature Range:
Operating 40-130°F 4-54°C
Storage 30-160°F -1-71°C
Maximum Fluid Temperature 160°F 71°C
Wetted materials:
Housings and manifolds Carbon steel with electroless nickel plating
Miscellaneous parts Plated carbon steel, stainless steels, carbide, acetal, UHM-
WPE, nylon, PTFE solvent resistant plastics
Pump packings Carbon filled PTFE, proprietary UHMWPE
Flush pump suction tube Aluminum
Hoses Nylon core