Filter
Top Products
Technical Data
3A0732J 41
Technical Data
* Sound power at 70 psi (0.48 MPa, 4.8 bar), 80 cpm. Sound power measured per ISO-9614-2.
** Sound pressure was tested 3.28 feet (1 m) from equipment.
Maximum fluid working pressure
15:1 Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . .
30:1 Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . .
1500 psi (10.3 MPa, 103 bar)
3000 psi (20.7 MPa, 207 bar)
Maximum air inlet pressure . . . . . . . . . . . . . . . . . . . 100 psi (0.7 MPa, 7.0 bar)
Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15:1 or 30:1 (see Models, page 3)
Maximum fluid temperature. . . . . . . . . . . . . . . . . . . 160°F, 71°C
Ambient air temperature range . . . . . . . . . . . . . . . . 35-120°F, 2-49°C
Package air inlet size . . . . . . . . . . . . . . . . . . . . . . . 3/8 npt(f)
Package fluid outlet size . . . . . . . . . . . . . . . . . . . . . 1/4 npsm(m)
Maximum motor speed . . . . . . . . . . . . . . . . . . . . . .
(Do not exceed maximum recommended speed of
fluid pump, to prevent premature pump wear.)
240 cycles per minute
Maximum spray tip orifice size . . . . . . . . . . . . . . . . .019 in. (0.483 mm)
Sound data
24G693 Air Motor
Sound power* . . . . . . . . . . . . . . . . . . . . . . .
Sound pressure**. . . . . . . . . . . . . . . . . . . . .
83.2 dBA
76.5 dBA
24G694 Air Motor
Sound power* . . . . . . . . . . . . . . . . . . . . . . .
Sound pressure**. . . . . . . . . . . . . . . . . . . . .
84.5 dBA
77.9 dBA
Wetted parts
Plated steel pumps . . . . . . . . . . . . . . . . . . . . . . Stainless steel, nickel plated carbon steel, tungsten
carbide, ptfe, acetal, leather, ultra-high molecular
weight polyethylene
Stainless steel pumps . . . . . . . . . . . . . . . . . . . . Stainless steel, tungsten carbide, ptfe, acetal,
leather, ultra-high molecular weight polyethylene
Spray guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See manual 3A0149 (G15 and G40 AA guns) or
311254 (Silver Plus airless gun)
Fluid hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nylon, plated or stainless steel
Suction assembly . . . . . . . . . . . . . . . . . . . . . . . . Stainless steel, nylon, acetal, fluoroelastomer,
polyethylene