Filter
Top Products
Gun Setup
13. Fully open the fan air adjustment valve (F)
counterclockwise.
14. Fully open the uid adjustment valve (H)
counterclockwise.
15. Fully open the atomizing air restrictor valve (G)
clockwise.
16. Turn ON (I) the ES On-Off switch (J).
17. Set the gun air regulator to deliver a minimum
45 psi (0.32 MPa, 3.2 bar) at the gun when
triggered, to ensure full spraying voltage. See
the table below.
TableTable
Table
22
2
..
.
PressurePressure
Pressure
DropDrop
Drop
AirAir
Air
HoseHose
Hose
LengthLength
Length
inin
in
ftft
ft
(m)(m)
(m)
(using(using
(using
5/165/16
5/16
in.in.
in.
[8[8
[8
mm]mm]
mm]
diameterdiameter
diameter
hose)hose)
hose)
AirAir
Air
RegulatorRegulator
Regulator
SettingSetting
Setting
inin
in
psipsi
psi
(MPa,(MPa,
(MPa,
bar)bar)
bar)
[with[with
[with
gungun
gun
triggered]triggered]
triggered]
15 (4.6) 55 (0.38, 3.8)
25 (7.6) 65 (0.45, 4.5)
50 (15.3) 80 (0.56, 5.6)
18. Check that the ES indicator (K) [Hz indicator on
Smart guns] is lit. See the following table.
TableTable
Table
33
3
..
.
LEDLED
LED
IndicatorIndicator
Indicator
ColorsColors
Colors
IndicatorIndicator
Indicator
ColorColor
Color
DescriptionDescription
Description
Green
When spraying, the indicator
should remain green, indicating
sufcient air pressure to the
alternator turbine.
Amber
If the indicator changes to amber
after 1 second, the air pressure
is too low. Increase air pressure
until the indicator is green.
Red
If the indicator changes to red
after 1 second, the air pressure is
too high. Decrease air pressure
until the indicator is green.
3A2494D19