Filter
Top Products
Model G0477 15" Planer/Moulder
-11-
Inventory
After all the parts have been removed from the
two boxes, you should have the following items:
Inventory (Figure 3) Qty
A. Long Frames .............................................. 2
B. Short Frames ..............................................
2
C. Plain Legs ................................................... 2
D. Notched Legs ............................................. 2
E. Long Braces ............................................... 2
F. Short Braces ..............................................
2
G. Planer/moulder (not shown) ....................... 1
Components and Hardware (not shown)
• Roller Adjustment Wrench ..........................
1
• Open-End Wrench 8/10mm ........................
1
• Rubber Grip Magnets .................................
2
• Hex Wrench 4mm .......................................
1
• Dust Chute .................................................
1
• Dust Chute Adapter ....................................
1
• Dust Collection Bag ....................................
1
• Bag Clamp ..................................................
1
• Cap Screw M6-1 x 25 .................................
1
• Button Head Cap Screw M6-1 x 25 ...........
1
• Crank Handle .............................................
1
• Handle Plug ................................................
1
• Phillips Head Screw M6-1 x 25 ..................
1
• Cap Screws #10-32 x 2
3
⁄8" ......................... 2
• Flat Washers #10 .......................................
2
• Wing Screws
1
⁄4-20 x 1
1
⁄4" ........................... 4
• Flat Washers
1
⁄4" ......................................... 4
• Threaded Guide Inserts ........................... 12
• Hex Bolts M8-1.25 x 80 (Stand) .................
4
• Flat Washers 8mm (Stand) ........................
8
• Hex Nuts M8-1.25 (Stand) ..........................
4
• Carriage Bolts
5
⁄16-18 x
3
⁄4" (Stand) ........... 24
• Flange Nuts
5
⁄16-18 (Stand) ....................... 24
Figure 3. G0477 Inventory.
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi
-
ency, replacements can be obtained at your local
hardware store.
NOTICE
Some hardware/fasteners on the inventory
list may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are miss
-
ing.
The Model G0477 is a
very heavy machine.
Serious personal injury
may occur if safe mov
-
ing methods are not fol
-
lowed. To be safe, you
will need assistance
when moving the ship
-
ping box and removing
the machine from the
box.
A
B
C
D
E
F