Filter
Top Products
-46-
Model G0740 (Mfg. Since 11/12)
The follow rest mounts to the saddle with two
cap screws (see Figure 58). It is used on long,
slender parts to prevent workpiece deflection from
the pressure of the cutting tool during operation.
Adjust the follow rest fingers in the same manner
as the those on the steady rest.
Note: To reduce the effects of friction, lubricate
the brass finger tips with generous lubricant during
operation.
Figure 58. Follow rest attachment.
Cap
Screws
The carriage, cross slide, and compound rest
have locks that can be tightened to provide addi-
tional rigidity during operation, especially during
heavy cuts.
See Figures 59–60 to identify the locations of the
locks for each device.
Figure 59. Location of carriage and cross slide
locks.
Cross Slide
Lock
Carriage
Lock
Figure 60. Location of compound rest lock.
Follow Rest Carriage & Slide
Locks
Compound Rest
Lock